Gear Hobs

Product Details:

Provided to the customers is a superior quality range of Industrial Gear Hobs as per their specific requirements. These products are widely used to cut spur & helical gears with accuracy & excellence. Gear Hobs Each meet the specifications of different types of profile modifications such as chamfering, topping, protuberance and tip relief.

 

Specifications:

 

• Available in single or multi-starts as per profile DIN 3972 in Class AA, A and B as per DIN 3968
• Pre Shaving Hobs, Roughing Gear Hobs and Pre Grinding Gear Hobs are available
• Module: 0.1 to 40 (24 mm to 360mm diameter)
• DP: 120 DP to 0.7

Product Details:

Hub type cutters are designed for cutting internal components where maximum rigidity is required. Screwed Hub type cutters are recommended for cutting long face widths or for coarse pitches.

In general terms, any tooth form, face width or number of teeth that is available on a shank cutter, can be manufactured with a hub type fitting.

Note: these cutters screw directly onto the spindle of the machine therefore rely on the spindle being in a good true state.

• Usage: used for roughing & finishing internal gears where it is not feasible to use external disc type cutters
• Nominal Pitch Dia : Φ50mm, Φ75mm, Φ100mm, Φ125mm

Product Details:

We have gained expertise in offering a high quality range of Timing Pulley Hobs to then customers as per the market demand. These products are widely used for timing pulleys with straight sided or involute teeth efficiently. Moreover, we ensure to make prompt delivery of the ordered products at the clients'' end with the help of our wide distribution network.

 

These products are used to cut different types of Timing Belt Pulleys:

 

• Synchroflex
• UNIROYAL & Powergrip
• HTD

 

Product Details:

We are one of the eminent names of the industry engaged in offering Roller Chain Sprocket Hobs to the customers. These products are widely used for roller chain sprockets, thus, highly demanded in the market. Moreover, we can customise these products as per the exact details provided by the clients.

 

Specifications:

 

• Available from 6 to 25.40 mm pitch as per DIN, IS, JIS and other standards
• Offered with ground or unground profiles
• Available in topping or non-topping designs 

Product Details:

We offer Chamfering Hobs that are used for chamfering the edges of gear teeth. This method of chamfering is by far the quickest, cheapest and most effective. This chamfering improves the smoothness and ease of the gear mesh between ring gears and the pinion gear. We present a vast assortment of Chamfer Hobs in different sizes and grades to suit every industrial requirement and also provide these in customized grades and dimensions.

Specifications:

• Material: Steel  M2
• Accuracy: Class A
• Pressure Angle: 20°
• Helix Angle: 2°16''
• Outside Diameter: 55
• Core Diameter: 22
• Length: 60
• Direction: Right-handed
• Straight Flute
• Number of Threads: Single
• Number of Slots: 12